Traps and holds dirt in your dust mop or cloth. Prevents scattering and resettling, giving your dust mop many times its dust holding capacity. Sprinkle or spray on a cloth or directly onto the mop. There's nothing to mix or measure. Use on tiles, concrete, wood, stone floors, and finished surfaces.
pH - N/A

#1263 - 4 x 1 gallon case

Directions

Mops should be thoroughly cleaned with a detergent-based cleaner, rinsed completely, and allowed to dry. Apply Dust Mop Treatment by spraying the chemical on the mop using a trigger sprayer, or immerse the mop into Dust Mop Treatment (squeeze excess treatment by wringing). For best results, allow the mop to dry thoroughly before using. A good procedure is to prepare the mops the night before and use them the next day. This procedure should be followed for optimum results.