Powdered Sanitergent Mark X Pipeline Cleaner's non-foaming, free-rinsing formula makes it ideal for use in circulating systems.

#10 - 15 lb. pail
#21 - 45 lb. pail

Directions

For pipelines, pipeline milkers, and milking machines. Follow product labels for correct application.

1. Immediately after milking, flush the entire system with warm water (110ºF) until the water runs clear.
   
2. Circulate a solution of Sanitergent Mark X at the rate of one ounce per 4 gallons of water (see water hardness table) for 10 minutes, opening and draining all valves at this time. Hand brush all parts not coming into contact with the solution.
   
3. Rinse with warm water until the water runs clear.
   
4. Acid rinse. Twice each week, circulate a solution of Milkstone Remover and Acid Rinse (ST-11, ST-213, ST-215, or ST-216) to remove milkstone and reduce the possibilities of a high bacteria count from milkstone formations.
   
5. Before reuse, sanitize with a solution of Hypo-Chlor Formula 6.40 (ST-1 or ST-2047). Do not rinse. ALL TREATED EQUIPMENT AND FOOD CONTACT SURFACES MUST BE RINSED WITH POTABLE WATER AND SANITIZED PRIOR TO REUSE.